安捷倫7890 便攜式氣相色譜儀甲烷轉化爐安裝現場

便攜式氣相色譜儀甲烷轉化爐安裝現場，液化石油氣，二甲醚，甲縮醛，乙縮醛，乙醇，室內空氣，焦爐煤氣，煉廠氣，變壓器油，多氯聯苯，植物油，乙酸乙酯，醫療器械，環氧乙烷，增塑劑，塑化劑

便攜式氣相色譜儀甲烷轉化爐安裝現場
便攜式氣相色譜儀甲烷轉化爐安裝現場 詳細信息：

一氧化碳與二氧化碳得到了較好分離,在鎳催化劑存在下,于360℃使一氧化碳和二氧化碳轉化為甲烷,然后用氫火焰離子化檢測器檢出。方法的小檢出量1ppm?？梢詽M足聚合工藝的要求。也可用于空氣及其它性氣體中微量一氧化碳和二氧化碳的測定。

甲烷轉化爐的安裝一直困擾著廣大的實驗室操作人員：這是因為安裝甲烷轉化爐需要對儀器進行改造，費時費力，一般化驗室人員根本無法獨立完成，既有氣路的改造，又有電路的連接，十分復雜，效率低下。成本高，改造后儀器變?yōu)閷Ｓ眯途窒扌源蟆?br />
為了解決甲烷轉化爐的安裝的難題，浩瀚色譜（山東）應用技術開發有限公司，采用新技術，研發出外置式便攜式甲烷轉化爐，無需改造儀器，直接和各種型號的氣相色譜儀，實現無縫對接，互聯互通，效率高。

應用實例：

**單位安捷倫7890氣相色譜儀安裝現場


便攜式氣相色譜儀甲烷轉化爐安裝現場 測試譜圖：



The determination of trace carbon monoxide and carbon dioxide requires the use of a hydrogen flame detector and a matching methane reformer to convert trace amounts of CO and CO2 into methane, which are measured with an FID detector and quantified by an external standard method.

It is very complicated to install a methane reformer on a finalized gas chromatograph. It is necessary to install both the gas circuit and the circuit. The instrument needs to be modified, time-consuming, laborious, and low-efficiency. The general user unit cannot install it at all. It requires the instrument manufacturer to come. Installation costs are high. And once the transformation is completed, the instrument is immobilized and its use is limited.

Haohan Chromatography (Shandong) Applied Technology Development Co., Ltd., using new technology, developed a universal HH-CH4-GC portable gas chromatograph, which was successfully installed on the Agilent 7890A gas chromatograph with good results.

The advantages of this methane reformer:
1. Lightweight, convenient and portable.
2. The user can complete the installation independently.
3. Installation is simple, convenient and fast.
4. The installation can be completed without modifying the instrument, saving time and effort and high efficiency.
5. When the trace amount of carbon monoxide or carbon dioxide is not analyzed, remove it directly and seal it.